Ultimate Guide: How to Drain Gas from Ariens Snowblower

To drain gas from an ariens snowblower, locate the carburetor bowl and open the drain valve. If you own an ariens snowblower and you need to remove the gas from it, you need to follow some simple steps.

You may need to drain the fuel if you want to perform maintenance or need to store the snowblower for a long time. Before proceeding, make sure to wear gloves and eye protection. Locate the carburetor bowl, which is usually located on the bottom of the carburetor, and open the drain valve.

Allow the gas to drain completely before closing the valve and disposing of the fuel according to local regulations. It is always better to consult the owner’s manual before performing any maintenance on your snowblower.

Ultimate Guide: How to Drain Gas from Ariens Snowblower

Credit: www.realsimple.com

Step-By-Step Guide To Draining Gas From Ariens Snowblower

Step 1: Gathering The Necessary Tools And Equipment

Before you start draining gas from your Ariens snowblower, make sure you have the right tools and equipment. Here is what you will need:

  • Safety glasses or goggles
  • Latex gloves
  • A drain pan or container
  • A new fuel filter (if necessary)
  • A siphon pump or tubing
  • Fresh gasoline

Step 2: Preparing The Snowblower For Gas Draining

Before you start removing the old fuel, you need to prepare your ariens snowblower. Follow these steps:

  • Turn off the engine and let it cool
  • Remove the ignition key to prevent accidental startup
  • Disconnect the spark plug wire for added safety
  • Remove any debris from the gas tank area

Step 3: Removing The Old Fuel

Once your snowblower is ready for gas draining, you can start removing the old fuel. Here are the steps:

  • Remove the fuel tank cap
  • Using the siphon pump or tubing, pump out the old fuel from the tank into the drain pan
  • If the fuel is still fresh, you can use it for other machines. If not, pour it in a gasoline-safe container.

Step 4: Emptying The Fuel Tank Completely

Now that you’ve removed the old fuel, it’s crucial to empty the fuel tank completely. Here are the steps:

  • Tilt the snowblower to one side to drain any remaining gas
  • Turn the snowblower over and remove any remaining fuel from the carburetor and fuel lines
  • Wipe away any residue from the fuel tank opening

Step 5: Cleaning The Fuel Tank And Carburetor

Before refilling with fresh gas, it’s essential to clean the fuel tank and carburetor thoroughly. Here is how:

  • Mix a solution of warm water and dish soap
  • Dip a clean cloth into the solution and clean the fuel tank
  • Use a clean rag to wipe away the soapy residue
  • Clean the carburetor with carburetor cleaner and compressed air

Step 6: Refilling With Fresh Gas

Now that your fuel tank and carburetor are clean, it’s time to refill with fresh gas. Here are the steps:

  • Carefully pour fresh gasoline into the gas tank
  • Check the fuel filter and replace it with a new one if required
  • Reattach the fuel tank cap
  • Reconnect the spark plug wire

Step 7: Properly Disposing Of The Old Gas

Properly dispose of your old gasoline to avoid harming the environment. Follow these steps:

  • Check your local community’s hazardous waste removal regulations
  • Identify a nearby recycling center or gas station that accepts old gasoline
  • Pour the old fuel into their designated containers for disposal

Following these steps will ensure that your ariens snowblower is ready for a new season of snow clearing. Stay safe and protect the environment by correctly disposing of old gas!

Tips And Tricks For Draining Gas From Ariens Snowblower

Winter season brings snowstorms, and what better way to clear the driveway than using an ariens snowblower. But the snowblower may not have been used in the offseason. Fuel left in the tank can degrade and cause problems when starting the snowblower next winter.

In this section, we will go over essential tips and tricks for draining gas from an ariens snowblower.

Tip 1: Use A Fuel Stabilizer

Adding a fuel stabilizer to the gas tank before storing the snowblower can go a long way in preventing fuel degradation. The fuel stabilizer will keep the gasoline fresh for up to 12 months, making it easier to start the snowblower when winter returns.

It also protects the carburetor from corrosion and deposits from building up, which can clog fuel lines.

Tip 2: Drain The Fuel Before Storing The Snowblower

Draining all the fuel from the snowblower before storage may be the most effective way to prevent fuel degradation. It can also prevent water buildup in the tank, which is more likely in a partially filled tank. Water can cause corrosion in the carburetor, which can lead to expensive repairs or replacement.

Nevertheless, if you choose to drain the fuel, do it with a cool engine to prevent burns from hot fuel.

Tip 3: Use A Clean And Dry Container For The Old Fuel

A gas storage container is essential when draining fuel from the snowblower. The container must be clean and dry, with a tight-fitting lid to avoid spills. It’s best to use a clear container to see the gas’s color, which should be consistent throughout.

A color difference can indicate water contamination or fuel degradation. Ensure the nozzle is clean before pouring the gas to prevent contamination.

Tip 4: Wear Gloves And Safety Goggles

Fuel can be hazardous when in contact with skin or eyes. Wearing gloves and safety goggles is essential when handling fuel. When draining fuel, ensure there are no open flames or sources of ignition nearby. Gas fumes can ignite and cause an explosion, leading to severe injuries, or even death.

Tip 5: Always Refer To The Owner’S Manual For Specific Instructions

Each ariens snowblower may have specific instructions for draining gas from the tank. It’s essential to refer to the owner’s manual to avoid damaging the snowblower and prevent voiding its warranty. The owner’s manual will also address safety procedures when handling fuel and appropriate disposal of the old fuel.

Maintaining the ariens snowblower will ensure it functions optimally in the winter. Draining the gas from the tank before storage can be essential in preventing fuel degradation and ensuring fuel efficiency when next in use. Remember to refer to the owner’s manual for specific instructions, use a clean container, wear gloves and safety goggles, and add a fuel stabilizer to the gas tank.

These tips and tricks will make draining gas from an ariens snowblower a breeze.



Common Mistakes To Avoid When Draining Gas From Ariens Snowblower

If you own an ariens snowblower, it’s essential to know how to drain gas from it. Gas should be drained from the snowblower when the machine is not being used for long periods, such as during the offseason. This helps prevent the gas from becoming stale, which can damage the engine and other components of your snowblower.

But, there are some common mistakes you need to be aware of when draining gas from ariens snowblower.

Mistake 1: Not Using The Correct Type Of Fuel

Using the wrong type of fuel is a common mistake that can lead to damage to your ariens snowblower engine. Always read the owner’s manual to identify the recommended fuel type to use. Using the proper fuel type helps your snowblower perform optimally with minimal damage.

Mistake 2: Forgetting To Turn Off The Engine

Before starting to drain gas from the ariens snowblower, it’s crucial to turn off the engine. This is easily overlooked, but it’s an important step to follow. Turning off the engine ensures that the snowblower is in a safe state, which prevents you from damaging it during the gas draining process.

Mistake 3: Not Cleaning The Fuel Tank And Carburetor Properly

Cleaning the fuel tank and carburetor thoroughly is an essential step when draining gas from ariens snowblower. Failing to clean these parts properly can cause clogs and other problems in the fuel system. The fuel tank and carburetor may accummulate debris and dirt that has to be cleaned for the machine to function properly.

Mistake 4: Overfilling The Fuel Tank With Fresh Gas

After draining old gas from the snowblower, filling the tank with fresh gas is a crucial step. However, overfilling the tank with gas can cause unnecessary expenses when you spill the new gas. As a general rule, fill the fuel tank to 95% capacity to prevent the overfilling problem.

Mistake 5: Not Disposing Of The Old Gas Properly

Disposing of the old gas is equally critical as draining the gas from your snowblower. Use a siphon to remove the old gas from the snowblower. Then, store the gas in a safe container and dispose of it following the local waste disposal guidelines.

Do not dispose of the gas improperly as this may harm the environment and ecosystem.

Regularly draining gas from your ariens snowblower is essential to keep it in good working condition. Avoid the above common mistakes and follow the manufacturer’s guidelines to ensure a prolonged lifespan and long-lasting performance.

Frequently Asked Questions For How To Drain Gas From Ariens Snowblower

How Do You Drain Gas From Ariens Snowblower?

Draining gas from an ariens snowblower is easy. You need to first turn it off, disconnect the spark plug wire, remove the gas cap and then tip it towards the bucket. Wait for a few minutes until the gas has drained completely.

Why Should I Drain Gas From My Ariens Snowblower?

Draining gas from your ariens snowblower ensures that your machine is well maintained. Old gas may corrode the carburetor, fuel lines and cause other internal damages. It also helps to prevent engine damage during storage.

Can I Reuse The Drained Gas?

You should not reuse the gas that is drained from ariens snowblower. Over time, fuel oxidizes and loses its potency. After a month or so, drained gasoline can cause issues in your snowblower engine.

Is It Necessary To Add Stabilizer To Gas Before Draining?

Adding fuel stabilizer to gas before draining helps to keep the fuel fresh for a longer period. If you plan to store your Ariens snowblower for more than a month, it is necessary to add a fuel stabilizer.

How Often Should I Drain Gas From Ariens Snowblower?

You should drain gas from the ariens snowblower if it is left unused for more than a month. If you use it frequently, you can add a fuel stabilizer to keep the gas fresh. Always use fresh fuel every winter season.


After reading this article, we hope that you now have a clear understanding of how to drain gas from an ariens snowblower. As we’ve mentioned, it’s important to prioritize safety and be cautious when handling gasoline. It’s essential to take the necessary steps to prevent spills and accidents.

Remember to use a fuel stabilizer and treat gasoline with care. Proper maintenance of your ariens snowblower will ensure it runs efficiently and lasts for many winters to come. If you have any questions or concerns, don’t hesitate to consult with a professional.

We hope our step-by-step guide was helpful in guiding you through the process of safely draining gas from your snowblower. Stay safe and warm this winter season!


Latest articles


Related articles

Leave a reply

Please enter your comment!
Please enter your name here